Kinoma Create is the ES6-powered device with integrated Wi-Fi, BLE, touchscreen, speaker, and microphone — designed for developers to take ideas to prototype and production

New features introduced on Version 2!

  • Are you tired of starting projects at the bare board level?
  • Do you want a fast, responsive development kit to start ideating with, right away?
  • Are you spending money on development kits that you end up using just once?
  • Is it technical drudgery every time you need to configure the software and basic components all projects need?

This is not the way to invent the future.

With better tools, the future can arrive sooner.

  • Color capacitive touchscreen
  • 16 programmable front pins under removable cover
  • 50 back pins support Power, Ground, Digital, Analog, I²C, Serial, PWM with labels printed on PCB
  • Compatible with off-the-shelf sensors
  • In the box: Kinoma Create device, Lithium Ion Battery, Charger and cable, Extra stands and white front sensor cover
  • New! Dual-Band Wi-Fi 802.11b/g/n/ac, and Bluetooth 4.0 Low Energy with ANCS support
  • New! 128 MB RAM, 32 MB SPI Flash
  • New! Custom, lightweight Linux distribution based on Yocto's Poky Distribution with a 3.10x Kernel
  • New! Digital input/output (20-36 GPIO, configurable), analog input (0-16, configurable), I²C (1 physical bus and two soft buses), Serial, PWM (19)
  • Color QVGA capacitive touchscreen
  • 800 MHz Marvell ARM SoC
  • microSD card slot
  • Speaker and microphone
  • Wired (USB) and portable power options — includes 2600mAh 3.7V Lithium Ion (Li-ion) 18650 rechargeable battery
  • No breadboard required for many breakout-board-based sensors
  • Front pins voltage level: 3.3V or 5V

New features introduced on Kinoma Create Version 2:

Bluetooth 4.0 Low Energy

PWM configuration supported on front pins

Bluetooth LE Explorer app

Labels of back pins printed on PCB


  • Creating hardware projects using familiar JavaScript.
  • Making that’s even more fun and fast, without the frustration of starting from a bare board.
  • Cutting a week of setup and configuration off the top of the product ideation process.
  • Prototyping products with an attractive, portable platform for demos.

We were developing connected consumer electronics, and realized there could be a better way to prototype. We knew developing projects could be an inspiring experience.

We made it our mission to power the next wave of connected device prototyping with a pro-developer experience that integrates hardware, software, and tools. And we conceived all of that expressly to be powerful, approachable, and fast.

Developers, designers and makers need to be able to explore ideas and iterate fast.

That's why we created Kinoma Create.

“Kinoma Create cut days off development time. I would normally not measure a project in hours; typically it would be measured in days.”

- David Goehrig,

JavaScript Programmers You Are No Longer Limited to the Virtual World - Now There's Kinoma #IoT #gigaomlive @Kinoma

- Eric C. Gould

Folks looking into IoT rapid prototyping tools should check out the @kinoma Create platform. Pure JavaScript.

- Scott Carter

Buy your own Kinoma Create now to quickly “sketch” ideas in hardware, have fun with making again, and turn your product ideas into a reality.